AI & ML

Fabric Defect Detection System for Indian Textile Mills

iJurug Soft2026-11-146 min read

A fabric defect detection system uses line-scan or area cameras, controlled lighting and a trained vision model to find holes, stains, broken ends, slubs and shade variation as fabric moves past the camera, then logs each defect on a digital roll map. For Indian mills, the real work is fitting it to existing frames, fabrics and grading rules.

If you already know which line you want to automate, share your fabric types and line speed with us and we will tell you what a sensible first pilot looks like.

Why textile inspection is a hard computer vision problem

Most quality inspection projects deal with rigid parts that look the same every time. Fabric does not. It stretches, wrinkles, changes texture from one quality to the next and often carries a printed or woven pattern that itself looks like a defect to a naive model. A knitting unit in Tiruppur and a weaving unit in Surat will need very different camera setups, even when both want to catch the same holes and oil spots.

Human checkers are skilled at this, but attention drops over a long shift, grading drifts between checkers, and buyers increasingly ask for documented inspection records. That is what makes automated detection worth considering.

Defects a system is usually asked to catch

Designing a fabric defect detection system: the four layers

Every working fabric defect detection system is built from the same four layers. Getting the first two right matters more than the choice of neural network.

Imaging: cameras and placement

Line-scan cameras are the usual choice for full-width inspection because they build a continuous image as the fabric moves, synchronized with an encoder on the roller. Area cameras can work on narrow widths or slower frames. Camera count depends on fabric width and the smallest defect you need to see; that minimum defect size drives resolution, which drives the number of cameras and the processing load.

Lighting: where most pilots succeed or fail

Backlighting through the fabric makes holes, thin places and missing yarns stand out on woven goods. Reflected or low-angle lighting is better for stains, raised slubs and surface faults. Dense or dark fabrics may need both. A short lighting trial on your actual qualities, before any model training, saves weeks later.

Models: anomaly detection versus supervised detection

There are two broad approaches, and most production systems combine them.

Anomaly detection

The model learns what good fabric looks like and flags anything that deviates. This suits mills with many qualities and few labeled defect images, because you mainly need clean samples. Its weakness is that it reports "something is different" without saying what.

Supervised detection and segmentation

Object detection or segmentation models are trained on labeled examples of each defect class, so they can name the defect and measure its length, which is what grading needs. They require a properly labeled dataset, and rare defect classes take time to collect. A practical path is to start with anomaly detection on day one and add classification as labeled data builds up.

Processing and integration

At industrial line speeds, inference usually runs on an edge computer beside the machine rather than in the cloud, with only defect records and image crops sent to a central server. The output that matters to the floor is a roll map: each defect with its position along the length and across the width, its class and its image.

Linking detection to grading, cutting and the ERP

Detection on its own does not change much on the shop floor. Value comes from what the data feeds:

Our guide to computer vision quality control architecture covers the edge-versus-cloud decision in more depth, and our view on AI for manufacturing in India explains where vision fits alongside other factory data projects.

A realistic rollout plan for a mill

  1. Scope one line and a few qualities. Pick a frame or machine with a clear quality problem and the fabrics that run most often.
  2. Lighting and imaging trial. Capture real fabric at real speed and confirm that the defects you care about are visible to the camera.
  3. Data collection and labeling. Gather good and defective samples, and agree defect definitions with your quality head so labels match how your checkers grade. Careful data annotation is what makes the model trustworthy.
  4. Shadow mode. Run the system beside human checkers and compare results roll by roll. This is where thresholds are tuned and trust is built.
  5. Go live with human review. Checkers confirm flagged defects on a screen instead of scanning every metre; their decisions become new training data.
  6. Extend. Add qualities, lines and the integrations listed above once the first line is stable.

Choosing a development partner

Ready-made inspection machines suit some mills. A custom build makes sense when your fabrics are unusual, you want to retrofit existing frames, or you need the defect data inside your own systems. Whoever you choose, ask how they handle lighting trials, how they label data with your quality team, how models are retrained when a new quality comes in, and who supports the system after launch.

iJurug Soft builds custom computer vision systems as part of our AI and machine learning services, with senior engineers on every engagement and a fixed-milestone process: Discover, Design, Build, then Launch and grow. We also handle the dashboards, integrations and cloud side, not just the model.

Frequently asked questions

Can a fabric defect detection system work on patterned or printed fabric?

Yes, but it needs more care. The model must learn the repeat of the pattern so that the design itself is not flagged, which usually means training per design family and sometimes using pattern-aware comparison techniques.

Do we need to replace our inspection frames?

Not always. Many frames can be retrofitted with cameras, lighting, an encoder and an edge computer, provided fabric tension is stable.

How many defect images are needed to start?

Anomaly detection can start mostly with clean fabric samples. Supervised classification needs labeled examples of each defect class, collected over time; shadow mode is a good way to gather them.

Will it replace our quality checkers?

In most mills it changes their role. Checkers review and confirm flagged defects and handle edge cases, while the system provides consistent coverage and records.

If you are planning automated inspection for a weaving, knitting or processing unit, tell us about your fabrics, line speeds and current grading process through our contact form, or write to info@ijurugsoft.com. We will review it and come back with a scoped pilot plan and a clear quote.